您的位置： &
大昌影音发布新品 TEAC UD-503和TEACNT-503
优质期刊推荐&&共有：15248名会员,最新注册：山石。&
功放音箱CD机书架箱胆机马兰士丹拿CD
您的位置： > &
真正平民的Hi-End DAC:TEAC UD-503
作者:关培青/阅读:-1-16
要： 显然TEAC没有以此为满足，在UD-501推出之后，又回头在更低的价位上推出了UD-301，两者并行销售；而现在更积极的推出了性能与配备再度攀升的UD-503，采用的众多技术根本真的就是平民版Esoteric。
联系电话：3 联系E-mail:
声明：本站大部分内容是由会员从前台登陆后发布的，若牵涉到版权或其它问题请及时告知，我们将第一时间删除
汕头市天讯电脑网络有限公司 版权所有 信息不得转载! Copyright . All Rights Reserved.
广东省通讯管理局 经营许可证：&&
订阅号及微网站：sthificom
视听发烧网發表，已被閱讀 <span style="font-family:A font-weight: color:#,675 次
&#25903;&#25588;&#39640;&#35299;&#26512;&#36664;&#20837;Teac AI-503&#32156;&#21512;&#25844;&#22823;&#27231;
有打算添購一款體積精巧、功能豐富的綜合擴大機嗎？那肯定得把日本Teac列入口袋名單，尤其是這款隸屬於Reference 5系列的AI-503綜合擴大機，更值得您多加留意。因為它不僅是一款綜合擴大機，也具備USB DAC可接受DSD、PCM高解析音樂輸入，同時也有方便的藍牙無線傳輸，而且同時支援aptX、LDAC，方便用家透過無線傳輸高解析音樂。AI-503和前代機種AI-501的外觀設計大致相同，可是內部DAC解碼規格卻有名明顯升級，譬如前代使用是BurrBrown PCM5102 DAC晶片，最高支援PCM 24bit/192kHz。但這次AI-503改換成AKM（Asahi Kasei Microdevices）製造的VERITA AK4490 DAC晶片，透過非同步USB端子輸入，可以支援高達32bit/384kHz的PCM以及原生DSD 11.2MHz高解析音樂檔案輸入，真可謂大躍進！此外，原廠強調，AI-503從DAC到前級放大的核心設計，遵循自家UD-503的設計理念，採用全平衡雙單聲道的電路設計，並且採用獨家開發的Teac-QVCS（高精度電子音量控制）。在後級擴大機的部分，AI-503用的是ICEPower的功率模組，在8歐姆負載條件下，可提供每聲道最大20瓦輸出功率，當阻抗下降至4歐姆，功率可翻倍至40瓦。除了可以驅動喇叭之外，AI-503也具備耳擴功能，內部使用分離的TEAC-HCLD電路，強調可輕鬆驅動高阻抗耳機。搭載耳機輸出為3.5mm的4pin插孔，旁邊有高/低增益切換按鍵，在32歐姆負載條件下，可提供每聲道280mW輸出功率，支援的耳機阻抗為16~600歐姆。輸出/入端子部分，AI-503具備USB、光纖、同軸、RCA類比輸入各一組，RCA類比輸出一組，在前面板上有一組3.5mm耳機輸出以及一組類比/光纖混合輸入。器材規格型式：綜合擴大機最大輸出功率：20瓦（8歐姆）、40瓦（4歐姆）額定輸出功率：15瓦（8歐姆）、28瓦（4歐姆）總諧波失真：0.005% (1kHz, 8Ω, 1W)訊噪比：100dB或以上頻率響應：10Hz~100kHz（+1/-3dB）輸入端子：USBx1、RCAx1、3.5mm(類比混合光纖)x1、數位同軸x1、光纖x1輸出端子：3.5mm耳機x1、RCAx1支援PCM解析度：24bit/192kHz（數位同軸/光纖）、32bit/384kHz（USB）支援DSD解析度：DSD 2.8MHz（DoP透過數位同軸/光纖）、DSD 11.2MHz（透過USB）藍牙版本：4.0，支援SBC、AAC、aptX、LDAC消耗功率：38瓦尺寸：290x81.2x264mm（WxHxD）重量：3.7kg進口總代理：勝旗網址：
[新聞] Teac CG-10M配備4組時脈端子，每組都有獨立的回路，可以最多提供四部數位器材精準的時脈。端子採BNC型式，只要您的數位訊源可外接主時鐘，且端子為BNC端子，就可以使用；或者您是Teac NT-503或UD-503的用家，它們都配備有BNC時脈...《
[新聞] Teac最新的CG-10M時脈產生器預計12底上市，本地代理商勝旗公司特別推出預購優惠活動，只要在12/20前預購，不僅享有44,900元的預購特惠價，再送Kimber Kable DV-30 BNC線一條（長度1公尺，市價4,000元），數量有限，欲購從速。《
這台E-02唱頭放大具備一組專門接收MC唱頭訊號的XLR輸入端子，以及2組可接收MC與MM唱頭訊號的RCA端子。為了搭配不同唱頭的電氣特性，在面板上裝載有輸入阻抗調整旋鈕，讓使用者無須打開機箱便可直接調整輸入阻抗，帶來便利的操作...《
ASR Luna 8不用傳統音量控制器，而是採用32個繼電器所組成的增益控制線路，所以沒有傳統音量控制器的缺點，且左右聲道的誤差在0.1dB的範圍之內。Luna 8為電源分離設計，放大線路與音量控制擺在一個機箱，另外加上電池供電與大型電源供應《
Yamaha宣布其環繞擴大機新一代韌體可支援Dolby Vision與HLG，共有超過10款以上的機型可享有此次韌體升級，自即日起可自Yamaha官網下載後經由USB更新。Dolby Vision技術是由杜比公司所制定的影像規格，擁有HDR與廣色域...《
丞遠傳媒股份有限公司　版權所有 &2007 HanMedia Inc. All Rights Reserved.- Select a Product -
CD-P800NT-B
CD-RW890MKII-B
HR-S101-BB
HR-X101-SC/BC
LP-R660USB-PB
PD-D2610mkII
TEAC Hi-Res Editor
TEAC HR Audio Player
TEAC HR Audio Player for iOS/Android
UD-503 OVERVIEW
Dual-monaural USB DAC that supports 11.2MHz DSD with built-in fully-balanced/parallel-unbalanced headphone amplifier
UD-503-B (Black)
UD-503-S (Silver)
TEAC is proudly to announce that the UD-503 have received Japan&s most authoritative award, the VGP 2016 (Visual Grand Prix) Gold Prize in D/C Converter category in October 2015.
DAC with dual-monaural structure is even more advanced
High-performance VERITA AK4490 DACs support 11.2MHz DSD and 384kHz/32-bit PCM
For DAC chips, which are the keys to digital audio, we have used VERITA AK4490 DACs, which are made by Asahi Kasei Microdevices Corporation and have an established reputation for use in high-end audio equipment.* The VELVET SOUND architecture provides the fine expressive capability suitable for the playback of high-resolution audio sources that reproduce sound waves outside the human audible range. Furthermore, a newly developed low distortion technology enables performance of S/(N+D) = 112 dB. This is the best level in the industry for a 120dB class DAC.
Not only is native playback with direct processing of 11.2MHz DSD signals possible, support is provided for an even greater variety of high-resolution audio sources, including 384kHz/32-bit PCM digital input. We have realized expression of the fine smooth detail and outstanding sense of sound placement that characterize high-resolution audio sources.
*The AK4490 is a product in the Audio4pro& family brand developed by Asahi Kasei Microdevices Corporation for professional audio equipment and high-end digital audio applications.
Dual-monaural structure supports fully-balanced transmission and realizes further advancement
Behind the expressiveness of the UD-503, which exceeds the level expected of its class, is an indulgent dual-monaural circuit structure that encompasses every aspect from the power and D/A sections to the analog output stage.
Starting with the toroidal core power transformers, which feature the ability to supply stable current, and the high-performance VERITA AK4490 DACs, the dual-monaural structure has a complete mono circuit for each channel. This prevents the signals from interfering with each other as much as possible. Interference is suppressed between the left and right channels, which is particularly important for headphone listening, so this unit can also be used as a high-performance headphone amplifier.
Furthermore, by processing the output signals of each channel completely with a differential from immediately after D/A conversion to the final output stage, common mode noise is removed and the sense of air that high-resolution audio has is not lost in transmission during balanced output.
In addition to 44.1kHz and 48kHz internal clocks, 10MHz external clock input is also supported./dt&
When connected by USB, rather than synchronizing with a computer clock that is unstable and noisy, the UD-503 supports asynchronous USB transfer mode, allowing it to control PCM and DSD signals by synchronizing with its own clock generated by its built-in high-precision crystal oscillator. Two dedicated internal clocks running at 44.1kHz and 48kHz are built in. By applying clock from an audio grade high-precision crystal oscillator, which features low phase noise, to input signals which that sampling frequency are whole number multiples, the effect of jitter on audio quality can be largely suppressed and the audio source can be reproduced faithfully.
In addition, with support for 10MHz external master clock input, synchronization with master clock signals of even higher precision is possible. By synchronizing with clock that has an even higher precision, you can enjoy changes in tone quality and improved audio quality that can be felt physically.
DSD Up-conversion function using a custom chip Using an FPGA (programmable IC) of our own design that utilizes a fluency algorithm to smoothly augment digital audio signals, in addition to the 2x, 4x and 8x upconversion of PCM digital signals, DSD up conversion is also supported. Using this, you can easily experience the dense sense of air that DSD files have even when listening to CDs from your collection.
You can up-convert 44.1kHz/16-bit audio files ripped from CDs up to 11.2MHz DSD format files, which have about 256 times the amount of data as the original CD files. 48kHz PCM audio files can be played back in 12.2MHz DSD format.
Four types of PCM digital filter and two types of DSD filter In addition to four types of PCM digital filters and an OFF mode, the unit has two types of DSD digital filters, so you can choose the best filter for the input file format and type of music. You can enjoy the subtle sound nuances of different filters without needing to connect different USB DACs.
PCM Filters
FIR SHARP:
An FIR filter with a steep roll-off sharply cuts signals outside the audio band.
An FIR filter with a slow roll-off gently cuts signals outside the audio band.
SDLY SHARP:
A short delay filter with a steep roll-off sharply cuts signals outside the audio band.
SDLY SLOW:
A short delay filter with a slow roll-off gently cuts signals outside the audio band.
DSD Filters
50kHz 150kHz
NOTE: When receiving signals at 352.8 kHz or 384 kHz, the digital filter will be disabled during playback regardless of this setting. Isolation circuit that completely separates the grounding of the digital and analog sections Between the digital and analog sections, the circuit design uses a digital isolator to completely isolate both the power supply and the ground. So, all noise coming from digital input sources, starting with noise from the computer via USB, is prevented from entering the analog section by way of the power line or the ground. An isolation circuit offers significant benefit particularly when playing high-resolution audio sources with high sampling rates. The UD-503 is the first product in our Reference Series to include one. Independent high-capacity toroidal core power transformers for left and right channels
Both left and right channels each have one dedicated high-capacity toroidal core power transformer that supplies stable current. This is also a continuation of the dual-monaural design and enables the stable supply of current to each channel without being influenced by the changes in current consumption due to processing of the other channel's signal. Even thought it is small, we have incorporated approaches that are used in much larger high-end audio devices.
Analog output circuits that have been further improved
Our original TEAC-HCLD output buffer circuit, which is a Current-Enhancing Output Buffer circuit In order to transfer music signals to output devices without losing their great dynamic range, we have included TEAC-HCLD (High Current Line Driver) circuits. These increase the current transfer capability that is crucial for analog output circuits.
We have applied the expertise that we have gained in the design of audiophile equipment, and for each channel side included two buffer circuits with high current transfer capabilities. By using differential drive for balanced output and parallel drive for unbalanced output, we have increased current transfer capabilities, allowing the transfer of music signals without losing their dynamism.
Preamp circuits now use TEAC-QVCS high-precision volume control with a four-circuit structure
The UD-503 can also be used as a preamp. One pair of XLR balanced outputs and one pair of RCA unbalanced outputs and included and can be set to either an adjustable or a fixed volume level, allowing a simple system to be put together in combination with a power amplifier or active speakers. We have even considered connection of record players such as the TEAC TN-300 turntable, cassette decks and other analog sources with line outputs by also including one pair of analog RCA inputs.
For the preamp circuit, we have utilized the TEAC-QVCS (Quad Volume Control System), which is a circuit with a fully-balanced design that uses balanced processing of the audio signal at every stage from immediately after conversion from digital to analog until it reaches the volume amplifier.
Control signals transmitted from the volume knob simultaneously adjust the variable gain amp type volume controls for a total of four independent circuits&positive and negative for both of the left and right channels. Using this system, the unnecessary manipulation of audio signals is eliminated, and the left/right and positive/negative independence of the audio signals is preserved, achieving clear sound quality with outstanding channel separation. (This does not apply when using unbalanced analog input.)
This volume control system realizes 256 steps of volume adjustment in 0.5dB increments over the complete range from &95 dB to +24 dB. Precise volume adjustment has been made possible using a remote control, which is difficult using motorized analog volume. In addition, optimal volume levels can be achieved for headphone listening, which requires precise volume adjustment, using headphones with various levels of efficiency. Volume display using OELD has excellent visibility
The organic electroluminescent display (OELD) with a 4-level dimmer provides high contrast and excellent visibility. A large font is used to enable listeners to check the volume even from distant positions.
Headphone amplifier that brings out even more of the potential of headphones
Headphone amplifier with discrete construction supports balanced drive headphones
The connection of balanced drive headphones is enabled by also using for headphone output TEAC HCLD circuits that are for line output and are composed of 4 output transistors each for both left and right channels. Furthermore, even during single end use, drive that is much stronger than an ordinary single end headphone amplifier is possible by making these transistors operate in parallel. In this unique circuit design, due to the AB class amplifier that greatly expands the A class operating range, A class operation is used for most of the range used in ordinary headphone listening. The potentials of various types of headphones can be brought out, starting with 600&O high-impedance headphones.
On the front of the unit, two 3-pole TRS (standard stereo) jacks are provided as headphone outputs. These can be switched between three types of drive operation. In addition to connecting balanced drive headphones, you can also use unbalanced drive to connect two pairs of ordinary headphones, as well as use active ground* drive, which can further decrease noise during silences and enhance the expressiveness of delicate sounds. Introducing a new drive method for headphones: active ground drive The active ground method is a drive method that, using the same connection method as balanced connection, forcibly sets the COLD to stable 0V with an amplifier circuit that connects the COLD to the ground. Not only can a ground that is closer to the ideal be achieved than when using the general grounding method, this method has the effect of suppressing the influence of hum from the power supply. Since the noise floor is lowered and silence enhanced, the breathing of artists and the textures of sounds can be felt even more immediately.
Click to enlarge.
Enclosure designed with great attention to detail
The full-metal body realizes both vibration control and elegant style in an A4-size body that enables placement on a desktop The construction of the entire body from metal panels that are effective against external noise suppresses the penetration of electromagnetic noise emitted by computers and other devices. This realizes a clean internal environment with low noise even when the surroundings are hostile to audio equipment. The metal chassis is also wrapped from both sides with 8mm-thick aluminum panels, and a center beam connects the front and rear of the chassis. These features prevent twisting and bending to realize a strong and stable body. In addition, the footprint that is the size of a page* allows it to be placed on tables, sideboards and other small spaces.
*Not including jacks, knobs and other protruding parts.
Symmetrically placed XLR output and RCA input and output jacks
The output jacks on the rear panel, including metal-plated XLR jacks for balanced output and RCA pin jacks for unbalanced output, have been symmetrically located for the shortest signal paths. The unit has been designed for connection with high-end equipment. For example, the left and right pin jacks have been placed with enough space between them to enable the connection of large-diameter RCA pin jacks.
In addition, three digital inputs on the rear panel (USB, coaxial and optical) are complemented by one (combined coaxial/optical connector) on the front. Starting with 192kHz/24-bit using the coaxial and optical digital inputs, the input of 2.8MHz DSD using DoP and other high-resolution signals is supported. The digital input on the front is a combined coaxial mini and optical mini connector, making it simple to connect a TEAC HA-P90SD or other portable digital audio player capable of digital output. (A coaxial-3.5mm mini conversion cable is included.) Three supportive pinpoint feet that allow easy installation
The three-point support method used for the legs enables stable body installation without influence from even the slightest surface irregularities. An original structure that unifies the spike-shaped foot with the mortar-shaped foot-stand is used for each leg. Vibrations and resonance are reduced by supporting the body of the unit on pinpoints. This thoroughly eliminates mid and low frequency heaviness and murkiness and realizes improved resolution, which brings out the details of sounds and sound placement.
Each pinpoint foot used on the UD-503 is composed of the foot (top of photograph) itself that is attached firmly to the chassis, and a foot base (bottom of photograph). The base flange (the outer rim of the mortar-shaped part) hangs from the flanges of three screws. Due to this structure, the interlocking flanges prevent the feet bases from falling off or shifting when the body of the unit is lifted. When the unit is placed, each spike point touches only the single deepest point in the mortar-shaped part of its base. Although the pinpoint method has been called the ideal for audio equipment feet, complete installation had been extremely difficult. With this structure, we have made installation using this method simple.。
TEAC HR Audio Player, which supports 11.2MHz DSD playback on both Windows and Mac, provided for free 11.2MHz DSD files can be played back easily using Windows or Macintosh computers without making complicated settings. The next-generation of high-resolution audio sources can be enjoyed immediately. (When using a Windows computer, a separate driver must be installed.)
Features at-a-glance
USB DAC that supports 11.2MHz DSD and 384kHz/32-bit PCM
Dual-monaural circuit structure used from the power supply to the digital and analog sections
Both left and right channels have their own high-end AK4490 DACs, which are made by Asahi Kasei Microdevices Corporation
Two high-capacity toroidal core power transformers&one each for left and right channels
Isolation circuit that completely separates the digital and analog sections electrically
4 TEAC HCLD buffer amplifiers, which are current-enhancing output buffer circuits, are used for the line amplifiers
Up-conversion to formats up to 12.2MHz DSD and 384kHz/32-bit PCM using an FPGA (programmable IC) that utilizes a fluency function
Two types of DSD filter and four types of PCM digital filter, as well as an OFF mode
10MHz external clock input supported (available during USB asynchronous transmission)
Two high-precision internal clocks&one each dedicated to 44.1kHz and 48kHz signals (available during USB asynchronous transmission)
One pair of RCA analog unbalanced inputs
Volume output can be set to fixed, fixed +6dB or variable for the one pair of XLR analog balanced outputs and one pair of RCA analog unbalanced outputs
XLR jack polarity can be set (2 HOT or 3 HOT)
TEAC QVCS high-precision volume circuit
Large digital volume display with excellent visibility and remote control with one-button operation of various functions
OELD display shows input signal type and various settings (with 3-level dimmer and off functions)
Fully-balanced drive headphone amplifier with discrete construction and maximum output of 700 mW + 700 mW
Headphone amplifier can be switched among 3 drive types: unbalanced, balanced and active ground
Digital inputs on the back include one USB, one coaxial and one optical
Combined coaxial mini/optical mini digital input connector on front is convenient for digital input from portable devices
Low power consumption design and automatic power saving function meet modern expectations
The full-metal body realizes both vibration control and elegant style in an A4-size body that enables placement on a desktop
TEAC original design for three-point support using pinpoint feet with attached bases
Compliant with RoHS
Copyright (C) 2016 TEAC, a division of TEAC America, Inc. All Rights Reserved.TEAC is a trademark of TEAC Corporation, registered in the U.S. and other countries.Other company names, product names and logos are the trademarks or registered trademarks of their respective owners.}