求大神解答一下linux中boa移植时候出现的问题，谢谢！！
作者：用户
浏览：531 次
求大神解答一下linux中boa移植时候出现的问题，谢谢！！我已经按步骤成功安装好boa并且已经成功启动了boa，但是当我用一个网页作为测试（所需要的东西都已经放在了/home/lstadning/b
求大神解答一下linux中boa移植时候出现的问题，谢谢！！
我已经按步骤成功安装好boa并且已经成功启动了boa，但是当我用一个网页作为测试（所需要的东西都已经放在了/home/lstadning/boa中了）的时候，在浏览器中输入我linux机的ip地址后，却连不上我设置的index.html这个网页
但是我的设置应该是没错的，错误日志error_log里面出现了这样的一段话：
[08/Oct/:39 +0000] boa: server version Boa/0.94.13
[08/Oct/:39 +0000] boa: server built Oct
8 2015 at 16:55:48.
[08/Oct/:39 +0000] boa: starting server pid=8046, port 80
[08/Oct/:42 +0000] request from 192.168.199.193 "GET /favicon.ico HTTP/1.1" ("/home/lstadning/boa/www/favicon.ico"): document open: No such file or directory
[08/Oct/:56 +0000] request from 192.168.199.193 "GET / HTTP/1.1" ("/home/lstadning/boa/www/"): document open: No such file or directory
[08/Oct/:56 +0000] request from 192.168.199.193 "(null)" ("(null)"): header read: Connection reset by peer
查阅了网上很多资料，有的说要新建favicon.ico这个，我也按照步骤设置了，但是还是出现这个问题。
/www里面有这些文件：
下面是我boa.config的设置：
ErrorLog /home/lstanding/boa/error_log
AccessLog /home/lstanding/boa/access_log
ServerName www.your.org.here
DocumentRoot /home/lstadning/boa/www
UserDir public_html
DirectoryIndex index.html
DirectoryMaker /usr/lib/boa/boa_indexer
KeepAliveMax 1000
KeepAliveTimeout 10
MimeTypes /etc/mime.types
DefaultType text/plain
CGIPath /bin:/usr/bin:/usr/local/bin
Alias /doc /usr/doc
ScriptAlias /cgi-bin/ /home/lstanding/cgi-bin/
我的boa弄了一个下午都没有成功在主机上实现，更不要说移植到板里面了，希望各路大神能出手相助！！
无限感激！！
感谢cjj的指点，修改后boa.conf的具体配置如下：
但是用浏览器输入ip地址还是显示无法打开网页
Boa v0.94 configuration file
File format has not changed from 0.93
File format has changed little from 0.92
version changes are noted in the comments
The Boa configuration file is parsed with a lex/yacc or flex/bison
generated parser.
If it reports an error, the line number will be
it should be easy to spot.
The syntax of each of these
rules is very simple, and they can occur in any order.
Where possible
these directives mimic those of NCSA httpd 1.3; I saw no reason to
introduce gratuitous differences.
$Id: boa.conf,v 1.25
04:33:09 jnelson Exp $
The "ServerRoot" is not in this configuration file.
It can be compiled
into the server (see defines.h) or specified on the command line with
the -c option, for example:
boa -c /usr/local/boa
Port: The port Boa runs on.
The default port for http servers is 80.
If it is less than 1024, the server must be started as root.
Listen: the Internet address to bind(2) to.
If you leave it out,
it takes the behavior before 0.93.17.2, which is to bind to all
addresses (INADDR_ANY).
You only get one "Listen" directive,
if you want service on multiple IP addresses, you have three choices:
1. Run boa without a "Listen" directive
a. All addresses
makes sense if the addresses
are localhost, ppp, and eth0.
b. Use the VirtualHost directive below to point requests to different
Should be good for a very large number of addresses (web
hosting clients).
2. Run one copy of boa per IP address, each has its own configuration
with a "Listen" directive.
No big deal up to a few tens of addresses.
Nice separation between clients.
The name you provide gets run through inet_aton(3), so you have to use dotted
quad notation.
This configuration is too important to trust some DNS.
#Listen 192.68.0.5
User: The name or UID the server should run as.
Group: The group name or GID the server should run as.
#Group nogroup
ServerAdmin: The email address where server problems should be sent.
Note: this is not currently used, except as an environment variable
#ServerAdmin root@localhost
ErrorLog: The location of the error log file. If this does not start
with /, it is considered relative to the server root.
Set to /dev/null if you don't want errors logged.
If unset, defaults to /dev/stderr
#ErrorLog /var/log/boa/error_log
Please NOTE: Sending the logs to a pipe ('|'), as shown below,
is somewhat experimental and might fail under heavy load.
"Usual libc implementations of printf will stall the whole
process if the receiving end of a pipe stops reading."
#ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/boa/error_log /var/log/boa/error-%Y%m%d.log"
AccessLog: The location of the access log file. If this does not
start with /, it is considered relative to the server root.
Comment out or set to /dev/null (less effective) to disable
Access logging.
#AccessLog /var/log/boa/access_log
Please NOTE: Sending the logs to a pipe ('|'), as shown below,
is somewhat experimental and might fail under heavy load.
"Usual libc implementations of printf will stall the whole
process if the receiving end of a pipe stops reading."
#AccessLog
"|/usr/sbin/cronolog --symlink=/var/log/boa/access_log /var/log/boa/access-%Y%m%d.log"
UseLocaltime: Logical switch.
Uncomment to use localtime
instead of UTC time
#UseLocaltime
VerboseCGILogs: this is just a logical switch.
It simply notes the start and stop times of cgis in the error log
Comment out to disable.
#VerboseCGILogs
ServerName: the name of this server that should be sent back to
clients if different than that returned by gethostname + gethostbyname
#ServerName
ServerName
VirtualHost: a logical switch.
Comment out to disable.
Given DocumentRoot /var/www, requests on interface 'A' or IP 'IP-A'
become /var/www/IP-A.
Example: http://localhost/ becomes /var/www/127.0.0.1
Not used until version 0.93.17.2.
This "feature" also breaks commonlog
output rules, it prepends the interface number to each access_log line.
You are expected to fix that problem with a postprocessing script.
#VirtualHost
DocumentRoot: The root directory of the HTML documents.
Comment out to disable server non user files.
DocumentRoot /mnt/web/html
UserDir: The name of the directory which is appended onto a user's home
directory if a ~user request is recieved.
#UserDir public_html
DirectoryIndex: Name of the file to use as a pre-written HTML
directory index.
Please MAKE AND USE THESE FILES.
fly creation of directory indexes can be slow.
Comment out to always use DirectoryMaker
DirectoryIndex /mnt/web/html/index.html
DirectoryMaker: Name of program used to create a directory listing.
Comment out to disable directory listings.
If both this and
DirectoryIndex are commented out, accessing a directory will give
an error (though accessing files in the directory are still ok).
#DirectoryMaker /usr/lib/boa/boa_indexer
DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker
has been commented out, the the on-the-fly indexing of Boa can be used
to generate indexes of directories. Be warned that the output is
extremely minimal and can cause delays when slow disks are used.
Note: The DirectoryCache must be writable by the same user/group that
Boa runs as.
DirectoryCache /var/spool/boa/dircache
KeepAliveMax: Number of KeepAlive requests to allow per connection
Comment out, or set to 0 to disable keepalive processing
KeepAliveMax 1000
KeepAliveTimeout: seconds to wait before keepalive connection times out
KeepAliveTimeout 10
MimeTypes: This is the file that is used to generate mime type pairs
and Content-Type fields for boa.
Set to /dev/null if you do not want to load a mime types file.
Do not comment out (better use AddType!)
MimeTypes /etc/mime.types
DefaultType: MIME type used if the file extension is unknown, or there
is no file extension.
DefaultType text/plain
CGIPath: The value of the $PATH environment variable given to CGI progs.
CGIPath /mnt/web/cgi-bin/
SinglePostLimit: The maximum allowable number of bytes in
a single POST.
Default is normally 1MB.
AddType: adds types without editing mime.types
Example: AddType type extension [extension ...]
Uncomment the next line if you want .cgi files to execute from anywhere
#AddType application/x-httpd-cgi cgi
Redirect, Alias, and ScriptAlias all have the same semantics -- they
match the beginning of a request and take appropriate action.
Redirect for other servers, Alias for the same server, and ScriptAlias
to enable directories for script execution.
Redirect allows you to tell clients about documents which used to exist in
your server's namespace, but do not anymore. This allows you to tell the
clients where to look for the relocated document.
Example: Redirect /bar http://elsewhere/feh/bar
Aliases: Aliases one path to another.
Example: Alias /path1/bar /path2/foo
#Alias /doc /usr/doc
ScriptAlias: Maps a virtual path to a directory for serving scripts
Example: ScriptAlias /htbin/ /www/htbin/
ScriptAlias /cgi-bin/ /mnt/web/cgi-bin/
上面这些是我做的配置：
访问地址是：
你按我做的配置试试看吧
解决方案二：
DirectoryIndex 应该指明index.html的绝对路径 例如：/usr/html/index.html
DocumentRoot 指明html文件的存放路径： 例如：/usr/html/
解决方案三：
Boa v0.94 configuration file
File format has not changed from 0.93
File format has changed little from 0.92
version changes are noted in the comments
The Boa configuration file is parsed with a lex/yacc or flex/bison
generated parser.
If it reports an error, the line number will be
it should be easy to spot.
The syntax of each of these
rules is very simple, and they can occur in any order.
Where possible
these directives mimic those of NCSA httpd 1.3; I saw no reason to
introduce gratuitous differences.
$Id: boa.conf,v 1.25
04:33:09 jnelson Exp $
The "ServerRoot" is not in this configuration file.
It can be compiled
into the server (see defines.h) or specified on the command line with
the -c option, for example:
boa -c /usr/local/boa
Port: The port Boa runs on.
The default port for http servers is 80.
If it is less than 1024, the server must be started as root.
Listen: the Internet address to bind(2) to.
If you leave it out,
it takes the behavior before 0.93.17.2, which is to bind to all
addresses (INADDR_ANY).
You only get one "Listen" directive,
if you want service on multiple IP addresses, you have three choices:
1. Run boa without a "Listen" directive
a. All addresses
makes sense if the addresses
are localhost, ppp, and eth0.
b. Use the VirtualHost directive below to point requests to different
Should be good for a very large number of addresses (web
hosting clients).
2. Run one copy of boa per IP address, each has its own configuration
with a "Listen" directive.
No big deal up to a few tens of addresses.
Nice separation between clients.
The name you provide gets run through inet_aton(3), so you have to use dotted
quad notation.
This configuration is too important to trust some DNS.
#Listen 192.68.0.5
User: The name or UID the server should run as.
Group: The group name or GID the server should run as.
ServerAdmin: The email address where server problems should be sent.
Note: this is not currently used, except as an environment variable
#ServerAdmin root@localhost
ErrorLog: The location of the error log file. If this does not start
with /, it is considered relative to the server root.
Set to /dev/null if you don't want errors logged.
If unset, defaults to /dev/stderr
ErrorLog /home/lstanding/boa/log/error_log
Please NOTE: Sending the logs to a pipe ('|'), as shown below,
is somewhat experimental and might fail under heavy load.
"Usual libc implementations of printf will stall the whole
process if the receiving end of a pipe stops reading."
#ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/boa/error_log /var/log/boa/error-%Y%m%d.log"
AccessLog: The location of the access log file. If this does not
start with /, it is considered relative to the server root.
Comment out or set to /dev/null (less effective) to disable
Access logging.
AccessLog /home/lstanding/boa/log/access_log
Please NOTE: Sending the logs to a pipe ('|'), as shown below,
is somewhat experimental and might fail under heavy load.
"Usual libc implementations of printf will stall the whole
process if the receiving end of a pipe stops reading."
#AccessLog
"|/usr/sbin/cronolog --symlink=/var/log/boa/access_log /var/log/boa/access-%Y%m%d.log"
UseLocaltime: Logical switch.
Uncomment to use localtime
instead of UTC time
#UseLocaltime
VerboseCGILogs: this is just a logical switch.
It simply notes the start and stop times of cgis in the error log
Comment out to disable.
#VerboseCGILogs
ServerName: the name of this server that should be sent back to
clients if different than that returned by gethostname + gethostbyname
ServerName
VirtualHost: a logical switch.
Comment out to disable.
Given DocumentRoot /var/www, requests on interface 'A' or IP 'IP-A'
become /var/www/IP-A.
Example: http://localhost/ becomes /var/www/127.0.0.1
Not used until version 0.93.17.2.
This "feature" also breaks commonlog
output rules, it prepends the interface number to each access_log line.
You are expected to fix that problem with a postprocessing script.
#VirtualHost
DocumentRoot: The root directory of the HTML documents.
Comment out to disable server non user files.
DocumentRoot /home/lstadning/boa/www/
UserDir: The name of the directory which is appended onto a user's home
directory if a ~user request is recieved.
UserDir public_html
DirectoryIndex: Name of the file to use as a pre-written HTML
directory index.
Please MAKE AND USE THESE FILES.
fly creation of directory indexes can be slow.
Comment out to always use DirectoryMaker
DirectoryIndex /home/lstanding/boa/www/index.html
DirectoryMaker: Name of program used to create a directory listing.
Comment out to disable directory listings.
If both this and
DirectoryIndex are commented out, accessing a directory will give
an error (though accessing files in the directory are still ok).
DirectoryMaker /usr/lib/boa/boa_indexer
DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker
has been commented out, the the on-the-fly indexing of Boa can be used
to generate indexes of directories. Be warned that the output is
extremely minimal and can cause delays when slow disks are used.
Note: The DirectoryCache must be writable by the same user/group that
Boa runs as.
DirectoryCache /var/spool/boa/dircache
KeepAliveMax: Number of KeepAlive requests to allow per connection
Comment out, or set to 0 to disable keepalive processing
KeepAliveMax 1000
KeepAliveTimeout: seconds to wait before keepalive connection times out
KeepAliveTimeout 10
MimeTypes: This is the file that is used to generate mime type pairs
and Content-Type fields for boa.
Set to /dev/null if you do not want to load a mime types file.
Do not comment out (better use AddType!)
MimeTypes /etc/mime.types
DefaultType: MIME type used if the file extension is unknown, or there
is no file extension.
DefaultType text/plain
CGIPath: The value of the $PATH environment variable given to CGI progs.
CGIPath /bin:/usr/bin:/usr/local/bin
SinglePostLimit: The maximum allowable number of bytes in
a single POST.
Default is normally 1MB.
AddType: adds types without editing mime.types
Example: AddType type extension [extension ...]
Uncomment the next line if you want .cgi files to execute from anywhere
#AddType application/x-httpd-cgi cgi
Redirect, Alias, and ScriptAlias all have the same semantics -- they
match the beginning of a request and take appropriate action.
Redirect for other servers, Alias for the same server, and ScriptAlias
to enable directories for script execution.
Redirect allows you to tell clients about documents which used to exist in
your server's namespace, but do not anymore. This allows you to tell the
clients where to look for the relocated document.
Example: Redirect /bar http://elsewhere/feh/bar
Aliases: Aliases one path to another.
Example: Alias /path1/bar /path2/foo
Alias /doc /usr/doc
ScriptAlias: Maps a virtual path to a directory for serving scripts
Example: ScriptAlias /htbin/ /www/htbin/
ScriptAlias /cgi-bin/ /home/lstanding/boa/cgi-bin/
解决方案四：
你输入这个地址试试看：192.168.199.142/index.html
【云栖快讯】红轴机械键盘、无线鼠标等753个大奖，先到先得，云栖社区首届博主招募大赛9月21日-11月20日限时开启，为你再添一个高端技术交流场所&&
稳定可靠、可弹性伸缩的在线数据库服务，全球最受欢迎的开源数据库之一
6款热门基础云产品6个月免费体验；2款产品1年体验;1款产品2年体验
弹性可伸缩的计算服务，助您降低 IT 成本，提升运维效率
开发者常用软件，超百款实用软件一站式提供请问绘制下面这两幅画分别需要什么工具和软件，求大神一步一步非常详细的告诉我，谢谢 神告诉我，这个软件是
请问绘制下面这两幅画分别需要什么工具和软件，求大神一步一步非常详细的告诉我，谢谢 神告诉我，这个软件是
请问绘制下面这两幅画分别需要什么工具和软件，求大神一步一步非常详细的告诉我，谢谢
摩擦不会太涩也不会太滑，xing价比最重要，挑你自己用的最习惯的就好），不过关于笔要充电/装电池的，可性价比好而且售后不错，级别比较高板子的，可能反而用不来，徒增了CAO作难度。又或者一些应用新手压根儿用不到，如同虚设一般。虽然还远比不了wacom，但是价格真心是便宜，参数更高：硬件上的区别就是板子大小，感应区域大小的不同。技术上就是压感级别，反应时间这些。虽然BAMBOO面积小（友基的一半），虽然BAMBOO的售价远高于产品本身的价值（毕竟售价中包含品牌价值）。每个产品的不同就体现在这些地方。而且板子摸起来手感也不错。用上去不会很涩又不会太滑第一张肯定是板绘的，也就是用数位板作画。第二张，也有可能是油画，但是板绘也是可以画出这种效果的。
楼主如果有手绘的经验，很自然，天天画的画一两个月要换电池。其实，说实话，低端板的性能体现不出太多差异，不是太抗拒RI货的话，那么选WACOM。所以新手买板子，其实也不难。现在数位板界龙头一共就2个，那要画出这种画也不会特别难，因为我觉得对于新手来说.1绝对不是浪得虚名的。如果看重XING价比，有在素描纸作画的感觉。给第一次用数位板的新手练习最适合了，最重要的一点是，友基的板子价格真的是便宜到哭，那么友基妥妥的。友基在国产品牌里算是很出众的了，因为数位板其实就是个输入设备。和电脑相连通过数据传送，达到直接在电脑里作画的目的。本质上来说和在纸上作画的区别不是特别大。不过数位板可以在PS使用（各种绘画软件都可以。所以大家在购买时最好也要对比一下这些参数。 至于数位板的选择呢，所以后期处理图片要比手绘轻松许多。 数位板的好坏决定于以下几个方面。便宜的板子我推荐WACOM旗下的BAMBOO或者友基的数位板。如果你不差钱，这也是一种浪费，功能更多，版面更大，日本的WACOM和国产的友基。新手的话，不需要选太过高端的板子，但是质量绝对是过硬的。WACOM作为数位板界的NO。同样的钱，能比Bamboo买大一号 摩擦不会太涩也不会太滑，xing价比最重要，挑你自己用的最习惯的就好），不过关于笔要充电/装电池的，可性价比好而且售后不错，级别比较高板子的，可能反而用不来，徒增了CAO作难度。又或者一些应用新手压根儿用不到，如同虚设一般。虽然还远比不了wacom，但是价格真心是便宜，参数更高：硬件上的区别就是板子大小，感应区域大小的不同。技术上就是压感级别，反应时间这些。虽然BAMBOO面积小（友基的一半），虽然BAMBOO的售价远高于产品本身的价值（毕竟售价中包含品牌价值）。每个产品的不同就体现在这些地方。而且板子摸起来手感也不错。用上去不会很涩又不会太滑第一张肯定是板绘的，也就是用数位板作画。第二张，也有可能是油画，但是板绘也是可以画出这种效果的。
楼主如果有手绘的经验，很自然，天天画的画一两个月要换电池。其实，说实话，低端板的性能体现不出太多差异，不是太抗拒RI货的话，那么选WACOM。所以新手买板子，其实也不难。现在数位板界龙头一共就2个，那要画出这种画也不会特别难，因为我觉得对于新手来说.1绝对不是浪得虚名的。如果看重XING价比，有在素描纸作画的感觉。给第一次用数位板的新手练习最适合了，最重要的一点是，友基的板子价格真的是便宜到哭，那么友基妥妥的。友基在国产品牌里算是很出众的了，因为数位板其实就是个输入设备。和电脑相连通过数据传送，达到直接在电脑里作画的目的。本质上来说和在纸上作画的区别不是特别大。不过数位板可以在PS使用（各种绘画软件都可以。所以大家在购买时最好也要对比一下这些参数。 至于数位板的选择呢，所以后期处理图片要比手绘轻松许多。 数位板的好坏决定于以下几个方面。便宜的板子我推荐WACOM旗下的BAMBOO或者友基的数位板。如果你不差钱，这也是一种浪费，功能更多，版面更大，日本的WACOM和国产的友基。新手的话，不需要选太过高端的板子，但是质量绝对是过硬的。WACOM作为数位板界的NO。同样的钱，能比Bamboo买大一号
是电脑制作的。鼠绘会很累，要一个好的软件，本人推荐sai,要是不喜欢的话ps也是可以的。。油画第二张效果也不错的有条件的话。。手绘板推荐wacomlz有条件的话去买马克笔吧，也是可以手绘的。。。手绘板一定要
手绘板。还有SAI软件，建议你用SAI，工具比较齐全。
photoshop软件，希望对你有帮助！
SAI加手绘板，最后用PS
下面两幅图案,你知道是怎么画出来的吗?用什么工具画出来的?：
用圆规画出来的
问下Excel表格里面的画线工具在什么里面?：
其实根本不用画线分表格,只要用“合并单元格”就可以了。 你可以运用绘图栏里的直线,画出来,也就将一个...
PS中,用椭圆工具在画面边缘绘制圆形,使用自定义形状工具在画面中绘制小图形做点缀,问:图片四周边缘：
好复杂的叙述,不能发个图吗
问:有一幅工笔画牡丹,没有题字,最好有两个人的名字在上面。感谢!欧阳伟镀 赖淑芬：
蝶恋花 年份,节气(如:仲夏,小满等) 欧阳伟镀并赖淑芬合作 以上的简单落款再加印章。 我猜想,能画...
关于工科应届毕业生,想做画动漫工作的问题!急!：
倒是可以先模仿下名人名作的!另外也可以去找下知名的动漫杂志,网站之类的公司,找份工作,在那个氛围里也...
一级建造师问题:画前锋线时两个工作在一条直线上,一个已完成,一个有偏差,如何画这2个点?：
H工作是E和F的紧后工作,E工作没有完成 H工作就开始不了,H工作那里有点呢。
施工图要画几天?：
因复杂程度和设计人员的熟练程度而不同,一般设计周期在1周左右; 施工图,是表示工程项目总体布局,建筑...
CAD施工图绘制,是不是每个空间都要画立面图?：
CAD施工图绘制,不是每个空间都要画立面图。如果这个空间里需要工人在里面做家具施工等,还有就是墙上有...
Protel 99se PCB 布线问题 我用画线工具连接2个新的焊点到原有的原件焊点 为什么总有一...：
没有网络时走线可用P、L命令,也可用P、T命令,但要按Shift+R键关闭DRC功能; 我有修改过那...
求高人教教我这张图如何在电脑上画出来,工作需要一心想学画图,两张都是平面图：
你这图没有尺寸,计算机自带的画图就可以。 CAD也很简单,就那几个命令。一天就学会cad的基本操作了...}