平板电脑进不了系统
，怎样刷机
全部答案（共2个回答）
和机子型号相同的数据包
希望对你有帮助
麻烦好评，谢谢
是升级系统了还是恢复出厂设置了
可以去专卖店维修。( 麻烦设为好评，谢谢 )
不知道你安装的是什么软件，可能是需要在用户软件许可协议下面有一个地方需要打狗，你看看有没有类似的地方，正常的话，你打过沟之后，那个同意的地方就是可以点击...
请您确保已经安装好了无线网卡驱动程序
请您使用以下方式安装驱动程序，联想电脑硬件有专用驱动。
请您记下您的电脑背面的服务编码然后请去联想官网下载驱动安装。不要安...
可以玩的，游戏你去拇指玩下载，一键导入数据包的。安装方便。
答: smi为什么关掉了
答: 一般是触控吧
希望对你有帮助
麻烦好评，谢谢
答: 可以使用无线网卡连接
大家还关注
Copyright &
Corporation, All Rights Reserved
确定举报此问题
举报原因(必选)：
广告或垃圾信息
激进时政或意识形态话题
不雅词句或人身攻击
侵犯他人隐私
其它违法和不良信息
报告，这不是个问题
报告原因(必选)：
这不是个问题
这个问题分类似乎错了
这个不是我熟悉的地区
相关问答：123456789101112131415已解决：任子行 net 110 88F6281，固件和刷机方法 - OPENWRT专版 -
恩山无线论坛 -
Powered by Discuz!
后使用快捷导航没有帐号？
只需一步，快速开始
请完成以下验证码
请完成以下验证码
查看: 1373|回复: 15
已解决：任子行 net 110 88F6281，固件和刷机方法
已有 13 人购买&
本主题需向作者支付 2 nb恩山币 才能浏览
我的恩山、我的无线
The best wifi forum is right here.
改以下文件
(op根目录)/target/linux/archxxx/base-files/etc/board.d/02_network
我的恩山、我的无线
The best wifi forum is right here.
改以下文件
(op根目录)/target/linux/archxxx/base-files/etc/board.d/02_network
QQ截图45.png (9.15 KB, 下载次数: 0)
10:46 上传
你好，这里，我分别改过这几个位置。
1.试过将eth0，eth1分别改为eth0.1，eth0.2
2.1 2 3 4 5t以及下面0 5t这里我改过多个组合，比如0 1 2 3 5t和4 5t，偶尔好一点的情况是LAN可以自动分配IP地址了。
但从始自终，交换机不能建立，WAN口没有。
我比较菜，对交换机VLAN更不了解，麻烦大牛具体指点。
我的恩山、我的无线
The best wifi forum is right here.
你好，这里，我分别改过这几个位置。
1.试过将eth0，eth1分别改为eth0.1，eth0.2
设备网口布局是什么样子的，WAN口在左还是右
我的恩山、我的无线
The best wifi forum is right here.
设备网口布局是什么样子的，WAN口在左还是右
你好，WAN在最左，往右依次是四个LAN。。
我的恩山、我的无线
The best wifi forum is right here.
QQ截图46.png (16.42 KB, 下载次数: 0)
12:38 上传
我这样配置的时候，通过无线网络可以上网，但相当于瘦AP，IP地址是上级路由的LAN网IP（192.168.10.x）。通过有线不能上网，有线的IP地址是192.168.1.X网段，也就是正常的LAN分配的IP段。
如果我把下面那行‘4 5t'改成’4 6t'，则连接无线网络后，无线网络的IP地址是正常的192.168.1.x的网段，有线网络也是，但都不能上网。
不论怎样，在luci，网络-&交换机里，不能启用。。命令行swconfig list也没有。如果/etc/init.d/network restart，则有提示：Failed to connect to the switch. Use the &list& command to see which switches are available.
我的恩山、我的无线
The best wifi forum is right here.
仔细阅读02_network这个文件吧，switch配置、网口布局都在这里面
我的恩山、我的无线
The best wifi forum is right here.
附系统日志：
Tue Sep&&5 11:57:23 2017 kern.info kernel: [&&743.494009] br-lan: port 1(eth0.1) entered forwarding state
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Interface 'lan' is enabled
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Interface 'lan' is setting up now
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Interface 'lan' is now up
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Interface 'loopback' is enabled
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Interface 'loopback' is now up
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Interface 'wan' is enabled
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Network device 'lo' link is up
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Network device 'eth0' link is up
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: VLAN 'eth0.2' link is up
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Interface 'wan' has link connectivity
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Interface 'wan' is setting up now
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Bridge 'br-lan' link is up
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: wan (5764): udhcpc (v1.23.2) started
Tue Sep&&5 11:57:23 2017 daemon.notice netifd: wan (5764): Sending discover...
Tue Sep&&5 11:57:23 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Sep&&5 11:57:24 2017 daemon.notice netifd: radio0 (5746): Configuration file: /var/run/hostapd-phy0.conf
Tue Sep&&5 11:57:24 2017 kern.info kernel: [&&744.208414] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Sep&&5 11:57:24 2017 kern.info kernel: [&&744.227076] device wlan0 entered promiscuous mode
Tue Sep&&5 11:57:24 2017 kern.info kernel: [&&744.231894] br-lan: port 2(wlan0) entered forwarding state
Tue Sep&&5 11:57:24 2017 kern.info kernel: [&&744.237419] br-lan: port 2(wlan0) entered forwarding state
Tue Sep&&5 11:57:24 2017 daemon.notice netifd: radio0 (5746): Using interface wlan0 with hwaddr 94:db:c9:79:9a:30 and ssid &BUTONGWIFI&
Tue Sep&&5 11:57:24 2017 kern.info kernel: [&&744.287920] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Sep&&5 11:57:24 2017 daemon.notice netifd: radio0 (5746): wlan0: interface state UNINITIALIZED-&ENABLED
Tue Sep&&5 11:57:24 2017 daemon.notice netifd: radio0 (5746): wlan0: AP-ENABLED
Tue Sep&&5 11:57:24 2017 daemon.notice netifd: Network device 'wlan0' link is up
Tue Sep&&5 11:57:24 2017 user.notice upnp daemon: external interface not found, not starting
Tue Sep&&5 11:57:25 2017 kern.info kernel: [&&745.487449] br-lan: port 1(eth0.1) entered forwarding state
Tue Sep&&5 11:57:26 2017 kern.info kernel: [&&746.227446] br-lan: port 2(wlan0) entered forwarding state
Tue Sep&&5 11:57:26 2017 daemon.notice netifd: wan (5764): Sending discover...
Tue Sep&&5 11:57:29 2017 daemon.notice netifd: wan (5764): Sending discover...
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.017853] device wlan0 left promiscuous mode
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.022363] br-lan: port 2(wlan0) entered disabled state
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.524127] br-lan: port 1(eth0.1) entered disabled state
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.531590] device eth0.1 left promiscuous mode
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.536148] device eth0 left promiscuous mode
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.540638] br-lan: port 1(eth0.1) entered disabled state
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.569123] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.586608] device eth0 entered promiscuous mode
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.598309] br-lan: port 1(eth0) entered forwarding state
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.603753] br-lan: port 1(eth0) entered forwarding state
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Interface 'lan' is enabled
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Interface 'lan' is setting up now
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Interface 'lan' is now up
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.624644] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.655169] device eth0.1 entered promiscuous mode
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.660104] br-lan: port 2(eth0.1) entered forwarding state
Tue Sep&&5 11:57:47 2017 kern.info kernel: [&&767.665713] br-lan: port 2(eth0.1) entered forwarding state
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Interface 'loopback' is enabled
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Interface 'loopback' is now up
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Interface 'wan' is enabled
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Network device 'lo' link is up
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Bridge 'br-lan' link is up
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Network device 'eth0' link is up
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: VLAN 'eth0.2' link is up
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Interface 'wan' has link connectivity
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: Interface 'wan' is setting up now
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: VLAN 'eth0.1' link is up
Tue Sep&&5 11:57:47 2017 daemon.notice netifd: wan (6063): udhcpc (v1.23.2) started
Tue Sep&&5 11:57:47 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Sep&&5 11:57:48 2017 daemon.notice netifd: wan (6063): Sending discover...
Tue Sep&&5 11:57:48 2017 daemon.notice netifd: radio0 (6045): Configuration file: /var/run/hostapd-phy0.conf
Tue Sep&&5 11:57:48 2017 kern.info kernel: [&&768.428344] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Tue Sep&&5 11:57:48 2017 kern.info kernel: [&&768.439789] device wlan0 entered promiscuous mode
Tue Sep&&5 11:57:48 2017 kern.info kernel: [&&768.444570] br-lan: port 3(wlan0) entered forwarding state
Tue Sep&&5 11:57:48 2017 kern.info kernel: [&&768.450131] br-lan: port 3(wlan0) entered forwarding state
Tue Sep&&5 11:57:48 2017 daemon.notice netifd: radio0 (6045): Using interface wlan0 with hwaddr 94:db:c9:79:9a:30 and ssid &BUTONGWIFI&
Tue Sep&&5 11:57:48 2017 kern.info kernel: [&&768.497057] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Tue Sep&&5 11:57:48 2017 daemon.notice netifd: radio0 (6045): wlan0: interface state UNINITIALIZED-&ENABLED
Tue Sep&&5 11:57:48 2017 daemon.notice netifd: radio0 (6045): wlan0: AP-ENABLED
Tue Sep&&5 11:57:48 2017 daemon.notice netifd: Network device 'wlan0' link is up
Tue Sep&&5 11:57:49 2017 user.notice upnp daemon: external interface not found, not starting
Tue Sep&&5 11:57:49 2017 kern.info kernel: [&&769.597480] br-lan: port 1(eth0) entered forwarding state
Tue Sep&&5 11:57:49 2017 kern.info kernel: [&&769.657474] br-lan: port 2(eth0.1) entered forwarding state
Tue Sep&&5 11:57:50 2017 kern.info kernel: [&&770.447443] br-lan: port 3(wlan0) entered forwarding state
Tue Sep&&5 11:57:51 2017 daemon.notice netifd: wan (6063): Sending discover...
Tue Sep&&5 11:57:52 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:57:54 2017 daemon.notice netifd: wan (6063): Sending discover...
Tue Sep&&5 11:57:57 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:57:58 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:00 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:01 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:06 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:11 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:16 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:21 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:26 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:31 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:36 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:41 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:46 2017 daemon.notice easycwmpd: add event '2 PERIODIC'
Tue Sep&&5 11:58:46 2017 daemon.notice easycwmpd: start session
Tue Sep&&5 11:58:46 2017 daemon.notice easycwmpd: configured acs url
Tue Sep&&5 11:58:46 2017 daemon.notice easycwmpd: external script init
Tue Sep&&5 11:58:46 2017 daemon.notice easycwmpd: external: execute inform parameter
Tue Sep&&5 11:58:46 2017 daemon.notice easycwmpd: send Inform
Tue Sep&&5 11:58:46 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:49 2017 daemon.notice easycwmpd: LibCurl Error: Failed to connect to 192.168.1.110 port 8080: No route to host
Tue Sep&&5 11:58:49 2017 daemon.notice easycwmpd: sending http message failed
Tue Sep&&5 11:58:49 2017 daemon.notice easycwmpd: sending Inform failed
Tue Sep&&5 11:58:49 2017 daemon.notice easycwmpd: external: execute apply service
Tue Sep&&5 11:58:49 2017 daemon.notice easycwmpd: external script exit
Tue Sep&&5 11:58:49 2017 daemon.notice easycwmpd: end session failed
Tue Sep&&5 11:58:49 2017 daemon.notice easycwmpd: retry session in 3840 sec, RetryCount = 12
Tue Sep&&5 11:58:51 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:58:56 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:01 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:06 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:11 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:13 2017 daemon.info hostapd: wlan0: STA e0:ca:94:cb:0c:a0 IEEE 802.11: authenticated
Tue Sep&&5 11:59:13 2017 daemon.info hostapd: wlan0: STA e0:ca:94:cb:0c:a0 IEEE 802.11: associated (aid 1)
Tue Sep&&5 11:59:13 2017 daemon.info hostapd: wlan0: STA e0:ca:94:cb:0c:a0 RADIUS: starting accounting session 59AE20BC-
Tue Sep&&5 11:59:13 2017 daemon.warn odhcpd[2418]: DHCPV6 SOLICIT IA_NA from fc08f1c8c736eb86e7c on br-lan: ok fdff:d2a8:8
Tue Sep&&5 11:59:16 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:21 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:26 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:31 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:36 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:41 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:46 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:51 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 11:59:56 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:01 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:06 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:11 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:16 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:21 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:26 2017 daemon.notice easycwmpd: add event '2 PERIODIC'
Tue Sep&&5 12:00:26 2017 daemon.notice easycwmpd: start session
Tue Sep&&5 12:00:26 2017 daemon.notice easycwmpd: configured acs url
Tue Sep&&5 12:00:26 2017 daemon.notice easycwmpd: external script init
Tue Sep&&5 12:00:26 2017 daemon.notice easycwmpd: external: execute inform parameter
Tue Sep&&5 12:00:26 2017 daemon.notice easycwmpd: send Inform
Tue Sep&&5 12:00:26 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:29 2017 daemon.notice easycwmpd: LibCurl Error: Failed to connect to 192.168.1.110 port 8080: No route to host
Tue Sep&&5 12:00:29 2017 daemon.notice easycwmpd: sending http message failed
Tue Sep&&5 12:00:29 2017 daemon.notice easycwmpd: sending Inform failed
Tue Sep&&5 12:00:29 2017 daemon.notice easycwmpd: external: execute apply service
Tue Sep&&5 12:00:29 2017 daemon.notice easycwmpd: external script exit
Tue Sep&&5 12:00:29 2017 daemon.notice easycwmpd: end session failed
Tue Sep&&5 12:00:29 2017 daemon.notice easycwmpd: retry session in 3840 sec, RetryCount = 13
Tue Sep&&5 12:00:31 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:36 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:41 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:46 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:51 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:00:56 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:01:01 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:01:06 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:01:11 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:01:16 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:01:21 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:01:26 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:01:31 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:01:36 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:01:41 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:01:45 2017 daemon.err uhttpd[2499]: Failed to connect to the switch. Use the &list& command to see which switches are available.
Tue Sep&&5 12:02:06 2017 daemon.notice easycwmpd: add event '2 PERIODIC'
Tue Sep&&5 12:02:06 2017 daemon.notice easycwmpd: start session
Tue Sep&&5 12:02:06 2017 daemon.notice easycwmpd: configured acs url
Tue Sep&&5 12:02:06 2017 daemon.notice easycwmpd: external script init
Tue Sep&&5 12:02:06 2017 daemon.notice easycwmpd: external: execute inform parameter
Tue Sep&&5 12:02:06 2017 daemon.notice easycwmpd: send Inform
Tue Sep&&5 12:02:09 2017 daemon.notice easycwmpd: LibCurl Error: Failed to connect to 192.168.1.110 port 8080: No route to host
Tue Sep&&5 12:02:09 2017 daemon.notice easycwmpd: sending http message failed
Tue Sep&&5 12:02:09 2017 daemon.notice easycwmpd: sending Inform failed
Tue Sep&&5 12:02:09 2017 daemon.notice easycwmpd: external: execute apply service
Tue Sep&&5 12:02:09 2017 daemon.notice easycwmpd: external script exit
Tue Sep&&5 12:02:09 2017 daemon.notice easycwmpd: end session failed
Tue Sep&&5 12:02:09 2017 daemon.notice easycwmpd: retry session in 3840 sec, RetryCount = 14
我的恩山、我的无线
The best wifi forum is right here.
本帖最后由 lce 于
01:00 编辑
向大家汇报进展，最新的发现：
把LAN接口绑定到eth0的时候，LAN接口就能自动分配内网IP地址，但WAN接口无法获取外网IP地址。。所有的网口包括WAN口，此时都表现LAN口的特性，也就是和电脑连接，会自动分配内网IP地址。
把WAN接口绑定到eth0的时候，WAN接口就能获取外网IP地址，但LAN接口无法自动分配内网IP地址。。
所有的网口包括LAN口，此时都表现WAN口的特性，也就是和上级路由连接，会获取外网IP地址。
LAN或WAN口绑定到eth1或eth0.1，eth0.2等，均无法获得或者分配IP地址。。。只有eth0可以。。
QQ截图29.png (88.2 KB, 下载次数: 0)
00:59 上传
QQ截图34.png (64.99 KB, 下载次数: 0)
01:00 上传
QQ截图58.png (47.7 KB, 下载次数: 0)
01:00 上传
我的恩山、我的无线
The best wifi forum is right here.
现在认为问题出在vlan这里，vlan不知什么原因不能启用，交换机无法连接。。。
我的恩山、我的无线
The best wifi forum is right here.
报告大家，我的问题已经解决了。是代码中我把marvell写成marvel导致。
我的恩山、我的无线
The best wifi forum is right here.
报告大家，我的问题已经解决了。是代码中我把marvell写成marvel导致。
你的编译的LEDE完成 了没 ？搞完了分享给我用用呗。
我的恩山、我的无线
The best wifi forum is right here.
你的编译的LEDE完成 了没 ？搞完了分享给我用用呗。
下载链接已放在一楼
我的恩山、我的无线
The best wifi forum is right here.
lce 发表于
下载链接已放在一楼
好，感谢分享。。。。。马上安排测试
我的恩山、我的无线
The best wifi forum is right here.
楼主，能不能把patch文件发一下，想用L大神的LEDE源码自己编译一下，谢谢了
我的恩山、我的无线
The best wifi forum is right here.
Powered by}